Complete Pharmaceutical Packaging Line for Tablets and Capsules
KAPSALL Unscrambler: Model AU6C: One USED Kaps All Bottle Unscrambler with Air Rinse. This is a low profile machine which is constructed in Stainless Steel and has polycarbonate safety guards. Equipped with a an elevator/hopper assembly, 30 Cu Ft hopper, 36” pre-feeder bowl, ionized air cleaner with vacuum, and integrated control panel. Can orient round, square, rectangular, oval and tapered containers. Unit was last set up for 50 cc, 75 cc, 120 cc, 150 cc, 200 cc, 300 cc, 400 cc, 500 cc and 750 cc bottles. Electric's 1/60/120 volts variable speed DC drive. Overall dimensions: 138 x 63 x 63 high
GEORGE GORDON Desiccant Feeder: Model PPS 250: One used Desiccant inserter this unit is a 2004 Model: PPS-250 and manufactured by George Gordon. This late model machine comes with servo drive, pneumatic knife, registration sensing, placing verification and is designed to deliver desiccant pouches at up to 240/ min., can also be set for one, two or three multi drops. Contact parts are made of S/S construction. Pouch size: 5/8- 2 W x 1- 6 L. Cutoff Accuracy: +/- 0.033 inches. Machine is mounted on portable base and can roll up to existing conveyor on line 115 V Compressed air: 2 CFM 80 PSI. Operating manual and all wiring drawings included.
KING Slat Counter: Model SC6L: One Used King Slat Counter Model SC6L. This unit was manufactured by King in the mid -Late 1990’s. Machine comes w/ S/S base and is a complete unit that was just removed from service. This unit has static eliminator, power lift, Indexing, controls, and 7 1/2 long variable speed conveyors. Can handle up to 100 BPM of 100 counts. Electrics are 208/2300V, 3 PH 60 cycle.
KING Cottoner: model CF100 RL: One used cottoner manufactured by King. This unit is a model CF 100 RL Unit is S/S and can handle up to 100 containers per minute. Comes with height adjustment, start/stop controls, Plexiglas guarding and is mounted to a Stainless Steel enclosed frame that comes with an approx. 7.5 long S/S conveyor with variable speed drive. Electric’s are 220 V/3/50-60 Hz, Inverted U cotton placement
KAPSALL Capper Model C 8 Spindle: One used capper that is manufactured by Kapsall. This unit is a Model C8. Unit comes with all stainless steel Contact parts and is an automatic high speed capper. This unit is capable of speeds up to 200 BPM depending on cap size. Cap range from 13 - 73 mm. Unit comes with a Centrifugal cap feeding bowl, extra bowl cap hopper, single gripper belt and 8 spindles with height and spindle adjustment assemblies. Unit is a stationary type capper that comes with a 7 foot variable speed conveyor. 208/220/3/50-60 unit is in very good working condition.
RAMSEY ICORE Model Scout IIe: One used Metal Detector model Scout IIe. Unit was manufactured by Ramsey Icore. Unit was manufactured in 2000 and is coming out of a major pharmaceutical operation. Unit is mounted on a stainless steel base with chain conveyor that measures 2 1/4 inches wide and approx. 50 inches long. Unit also has a reject station. Aperture model number is an MSIIe-0610 size is 5.91 Wide X 9.84 High & line height is 35.5 inches. Unit comes with operating manual.
LSI Labeler Model 400: ONE Used Labeler manufactured by LSI. This unit is a wrap-around pressure sensitive type. The model is a LSI 400 and comes with an open date coder, Bottle spacer wheel, Label inspection/Reject station and a 12’ long variable speed conveyor. This unit was last running a 5” high label at 100 bottles per minute. The label peel plate can handle a 6.5 inch label.
NEW MARBURG Neck Bander Model M 5 with Heat Tunnel: One BRAND NEW Neck Bander manufactured by Marburg Industries. This unit is an Entry Level Autocapsealer. Simplicity of design, user friendly interface, and ease of use make it easy for line personnel to understand and operate. Using a spacing wheel instead of traditional feed screw product transport mechanisms, changeover takes less than 10 minutes. Speeds up to 100 bottles per minute. The M5 series size range 25-90 mm. Lay Flat. Unit is made of Durable stainless steel construction. Quick wash down type, Compact space saving design. Unit is made in the U.S.A. Unit comes with ONE set of tooling for band size and an all S/S model CR 6000 Heat Tunnel.
NEW ENERCON Air Cooled Induction Sealer Model Super Seal 100: One New Enercon Induction Sealer, SUPER SEAL 100 – Waterless Induction Sealing System Super Seal 100, from Enercon uses the same advanced power supply circuitry with an innovative waterless sealing head. The completely waterless system eliminates the need for a water recirculation, saving floor space and money. Power supply with advanced IGBT circuitry High efficiency "plug-in" sealing head Wide Flat Sealing head to accommodate up to 120mm caps Adjustable sealer mount accommodates a wide range of bottle heights Advanced control panel with digital meter Local/Remote mode for power on/power off mounting Yoke NEMA 4 rated for wash-down Input Power: 240 V, 3 Phase 10 amps
NEW S/S 48” Accumulating Table: One NEW Accumulating Turntable made of Stainless Steel. This unit is a 48 inch model that is manufactured in the USA. This unit is completely stainless steel and is driven by a variable speed 90 Volt, 1/4 HP Dayton Gear Motor, 6 output RPM, 500 Lbs per inch of torque. Electrics are 115 volt, 1 PH, 60 HZ. Height floor to Disc is adjustable from 28 to 34 and the weight is 150 lbs. Single rail system with HDPE bottle contact surface and tool-less adjustments.
Additional Prep Fees May Apply