DESCRIPTION:
This UHLMANN thermoformer machine is equipped with every conceable state-of-the-art safety and protective device. The control panel houses the display unit, operating controls and indicator lamps. The machine control consists of a PLC housed in the control cabinet, an electronic degree encoder and a diagnostic display.
SECTORS OF USE:
Pharmaceutical, chemical, cosmetics, food, dietary, medical devices, manufacturing.
MAIN FEATURES:
The blister pockets are formed in the forming station. For forming the heated film is clamped between the upper and lower forming tools. The actual forming is effected by the introduction of compressed air. The products to be packed are filled into the hopper. From the hopper, the products are transferred level-controlled by a vibrating chute to the distribution roller box. Then they are transported to the feed channels and subsequently they are fed into the blister pockets by way of spring tubes. The vibratory chute consists of hopper, perforated plate, variable speed vibrator and infeed piece. The mechanical overload safety system provides damage protection for the tools in the event of intrusion of any extraneous object into sealing area, or if the formed web does not seat correctly in tools. In the coding station a code consisting of letters or numbers is embossed into the individual blisters. The sealed packages are punched out from the film webs in the punching station. The system performs a cross-check to ascertain whether misfills detected by fill control have actually been rejected. The packages as last step get cooled in the cooling station to prepare them for further processing.
Year of construction: 1993
TECHNICAL DATA
Machine speed
15-50 strokes/min at 12 mm drawing depth
15-40 strokes/min at 28 mm drawing depth
Format range, working area
In index 220 mm, across web 284 mm
Drawing depths 12 and 28 mm
PVC sheeting stickness 0.1 mm – 0.5 mm
Rated current 30 A
Fuse rating 35 A
Voltage 380/220 Volt
Frequency 50 Hz
Additional Prep Fees May Apply