RKS stands for "Random King Size." The 700rks runs a large range of cases and has 3 inch taping while the 700r has 2 inch tape heads and doesn’t run as many cases.
1. Power Requirements:
- Electrical - 115 VAC, 60 Hz, 6/4 A (675 watts)
- Pneumatic - 85 PSIG [6 bar pretre], 2.5 SCFM
- [70 liter/minute @ 2PC, 1.01 bar] maximum at maximum random cycle rate.
- A pressure regulator/filter is included.
2. Operating Rate:
-Up to 15 boxes per minute. Actual production rate is dependent on box size, box size mix, and operator dexterity.
-Box drive belt speed is 78 FPM [ 24 mpm]
3. Operating Conditions:
-Use in dry, relatively clean environments at 5 degrees to 40 degrees Celsius ( 40 to 105 degrees Fahrenheit) with clean, dry boxes.
-Note: Machine should not be washed down or subjected to conditions causing moisture condensation on components.
The machine is equipped with two 1/4 HP gearmotors and comes with an 8 foot [2.4m] standard neoprene covered power cord and a grounded plug.
4. Tape:
- Scotch brand pressure- sensitive film box sealing tapes.
5. Tape Width:
- 50 mm [2 inches] minimum to 72 mm [ 3 inches] maximum
6. Tape Roll Diameter:
- Up to 405 mm [16 inches] maximum on a 76.2 mm [3 inch] diameter core.
(Accommodates all system roll length of Scotch brand film tapes.)
7. Tape Leg Length - Standard
- 70 mm +/- 6mm [2-3/4 inches +/- 1/4 inch]
Tape Leg Length- Optional:
-50 mm +/- 6 mm [ 2 inches +/- 1/4 inch]
8. Box Board:
- Style- regular slotted containers- RSC
- 125 to 275 P.S.O. bursting test, single wall or double wall B or C flute.
9. Box Weight and Size Capacities:
- Box Weight, filled- 2.3kg [5 lbs.] minimum, 38.6 kg [85lbs] maximum- contents must support flaps.
Box Size Minimum
- Length - 150 mm [6 inches]
- Width - 175 mm [7 inches]
- Height - 120 mm [4-2/4inches]
Box Size Maximum
- Length: Unlimited
- Width: 645 mm [25-1/2 inches]
- Height: 645 mm [25-1/2 inches]
Additional Prep Fees May Apply