SHINI USA Standard Hopper Dryer SHD-25
SHD-25 hopper dryers are used for drying hygroscopic plastics, such as PS, PP, and ABS etc., which can reach the highest drying temperature up to 160. In addition, multiple accessories are optional to realize different functions, such as recycling hot air and filtering metal impurities in the materials. With the floor stand, it makes floor mount of the machine available.SHD series Standard hopper dryers offer an effective and low-cost method for plastic material drying. Hot air is used to dry wet materials that due to moisture absorption during packaging, transportation, and recycling cycles. They can be directly mounted on the moulding machine for quick drying and space saving. For this series, hot air blows evenly from bottom to the top (both SHD-800 and SHD-1000 have down-blowing air pipe and accessible door for easy material clearance) of the hopper with capacity ranging from 12~1,000kg, standard equipped with RS485 communicating function.
SHD-25 Series Are Suitable For Drying Row Materials And Recycling Materials, Such As ABS, PA, PBT, PC, PE, PET, PMMA, PP, POM, PPS, PS, PUR, PVC And So On. SHD Can Not Be Suitable For Drying Powder Materials And All Kinds Of Food, Chemical Medicine.
SHD series are suitable for drying row materials and recycling materials, such as ABS, PA, PBT, PC, PE, PET, PMMA, PP, POM, PPS, PS, PUR, PVC and so on. SHD-25 can not be suitable for drying powder materials and all kinds of food, chemical medicine, inflammable and explosives materials, volatile goods. If customers product is optical grade, SCD-OP series is available but not SHD series. If it is hygroscopic materials, such as ABS, PA, PC, PET, PMMA, etc., SHD should be equipped with SD-H series. If the size of raw materials are uneven or other forms, material density is need to be considered.25Kg and 50 KG Capacity Available
Feature
Adopt heat-insulated blower to prolong blower lifespan.
The heating tank adopts double-layer insulation structure which not only can reduce the power consumption but also can avoid too high of the ambient temperature.
All material contact surfaces are made of stainless steel to eliminate material contamination.
With overheat release function, when the drying temperature exceeds the set deviation value, the main power supply will be automatically cut off.
All series are standard equipped with the one-week timer and intermittent operation function.
The max. drying temperature can reach 160
For high temp. (180) models, add H at the end of the model code (applicable to SHD-12E~200E)
The option of magnetic base is available, add M at the end of the model code.
Optional RS485 interface is available, add C at the end of the model code.
For models optional with 24V microcomputer, RS485 interface and three color alarm light, add A at the end of the model code.
The option of insulated hopper is available, add I at the end of the model code.
Additional Prep Fees May Apply