DOUGLAS SD20-ELEL Commercial Door Pot and Pan Dishwasher | Door Type Dishwashers

    Browse our other
    Door Type Dishwashers

    Item Details

    Item Id 335542
    Item #: 335542
    Item: DOUGLAS SD20-ELEL Commercial Door Pot and Pan Dishwasher
    Model #: SD20-ELEL
    Serial #: 17/13143
    Year Built: N/A
    Location: Rhode Island
    Price: $14,000.00

    Description

    This unit has never been used and is out of box just like new.

    This unit was returned due to a dented door panel which has been replaced.
    There may be other minor light scratches, but this unit is otherwise new and unused out of the original box.

    The SD-20 is a split door, front loading, batch washer that is designed to wash and sanitize various containers commonly found in the bakery, food processing, nutraceutical, and distribution industries. It is also suitable for many industrial applications.

    The machine features two stainless steel tanks that can be heated with electric, gas or steam booster heaters. One tank is used to recirculate detergent wash water and the other is for dispensing sanitizing rinse water.

    Wash times are pre-programmed at 4, 6 or 8 minutes. Regardless of the wash cycle selected, each is followed by a 30 second sanitizing rinse and a 60 second steam exhaust cycle.

    Using the shortest wash time, the machine can process up to 10 batches an hour. At this maximum rate of operation, the SD-20 will use just 56 gallons of water per hour.

    Standard and custom wash racks are available to process several types of containers. While capacities vary depending on size and configuration, sheet pan capacity is 20 per batch.

    Like all Douglas Washers, the SD-20 will help you meet today’s high standard for cleanliness and sanitation while saving you time, labor, water, and energy.

    ELECTRICAL
    480 Volt - 3 Phase, 40 Running Amps, 50 Amp Minimum Service Breaker

    DOOR
    Stainless steel split door design. The top half rises while the lower half folds down to provide a space saving drain table.

    SPRAY ARM ASSEMBLY
    Stainless steel spray arm assemblies, with stainless steel jets and quick-release mechanism for easy cleaning and reassembly.

    FILTER
    Perforated, removable, stainless steel baskets.

    WATER PUMP
    7½ H.P., 480 volt with output of 120 gallons per minute at 35 to 45 P.S.I.

    DIGITAL CONTROL & INFORMATION CENTER
    Push pad operation of “power on”, “stop” and “short, medium, or long wash cycles”. A digital display indicates “time remaining” for each cycle. LED’s indicate wash,rinse, and unload functions. Pre-programmed circuit board allows the push pad to be used as a “diagnostic center” by displaying “error codes” for ease of troubleshooting.

    GAUGES
    Special moisture resistant design, measures wash temperature, wash pressure, and rinse temperatures.

    WASH TANK
    Stainless steel with electric, infrared gas, live steam or steam coil heating, thermostatically controlled, low-water protected, sloped to drain with a 36 gallon capacity

    RINSE TANK
    Stainless steel with electric immersion heater. Uses 5.6 gallons per 30-second cycle.

    WASH RACKS
    Stainless steel rod, built to match specific washing requirements. Usable area 26½” D x 39” W x 26½” H.

    SHIPPING
    Crated weight – approximately 1200 lbs.
    Crated size approx – 62” L x 46” W x 93” H

    Shipping is not included. The item will be crated on a pallet. We can provide shipping estimates if necessary
    Additional Prep Fees May Apply

    Shipping

    Height: 93.00 in
    Width: 46.00 in
    Length: 62.00 in
    Weight: 1200.00 lbs
    Prep Fee: N/A
    Registered Customers can request shipping quotes free of charge. Shipping Quotes take 1-3 Business Days to Process

    charticon This item has  today
    moneyicon Have one to sell?
    Sell
    Need Financing? FinanceLink

    Testimonials

    • "The biggest demand for manufacturers today is to become operational as quickly as possible and Bid on Equipment provides this solution." - Dave M.
    • "The strength of their site is how often our machinery comes up on web searches." - John G.
    • "We appreciate BoE... Always helpful, friendly and very professional." - Ali L.
    • "If you have questions about machinery you're buying they will find someone who can help. Everyone I talk to here is very friendly." - Tim Y.
    • "BoE is a powerful site that has yielded great results for our company. If you need to buy or sell equipment, I recommend this site." - Michael M.
    • "BoE keeps the engine turning and its potential is limitless. They take out the nonsense that you find on auction sites." - George P.
    • "I have sold 2 large Electric Motors through Bid On Equipment. They got them sold within a month!" - Richard B.
    • "The best thing to happen to our company, the personnel are fantastic..." - Ron W.