Thermo HyPerforma G3Lite Bioreactor Controller w/ 30L Single Use Fermentor (SUF)
***This unit is for sale AS/IS due to TruLogic Controller failed. Unit has slight wear from normal use. (Accessory shaft is bent). Everything pictured included. See photos for further details.
Includes:
HyPerforma G3Lite Controller
30 L HyPerfroma Single Use Fermentor
The Thermo Scientific HyPerforma G3Lite Controller is an open architecture control system that can be integrated with any single-use bioreactor such as the Thermo Scientific HyPerforma Single-Use Bioreactor (S.U.B.). Available in sizes ranging from 30 L to 2,000 L. The system consists of a control tower that leverages intelligent transmitters, mass flow controllers (MFCs), pumps, sensors, and Thermo Scientific TruBio software, which facilitates easy, reliable, and repeatable process
development and commercial cell culture processes. HyPerforma G3Lite Controllers are fully self-contained, movable units that can be operated as stand-alone (for 1 vessel) or networked for multiple vessels. They are engineered to optimize capital cost for use in non-GMP and cGMP-certified production facilities.
Benefits
Open architecture capabilities to integrate and communicate with vessels from other suppliers* (Sartorius, Millipore, and GE)
Return on investment (ROI) help increase productivity and minimize downtime
Features
Stand-alone or networked (for multiple vessels) enabled by distributed control system (DCS)
Flexible upstream TruBio software powered by Emerson DeltaV system
Includes up to six MFCs with air, O2, N2, CO2 for direct sparge, cross-flow, and overlay
Probe configuration options flexibility to connect electrochemical, single-use, or both for pH and dissolved oxygen (DO) measurements
Foam level, load cell, and Thermo Scientific TruTorr II pressure transmitters included in controller
Scalabilitytransfer any process from 30 L to 2,000 L
Modularitypredefined configurations available for 30, 50, 100, 250, 500, 1,000, and 2,000 L bioreactors
Scales and pumps available for multifeed purpose, including four peristaltic pumps for acid, alkali, antifoam, and feed
Includes vent filter heater controller
Touchscreen interface for easy data entry and control when necessary
Temperature control unit (TCU) integration options available for implementing a temperature control strategy
HyPerforma G3Lite Controller specifications
Cart dimensions: (H x W x D) 160 x 68 x 54 cm (63 x 27 x 21 in.)
Enclosure rating Cart: NEMA 12/IP52, HMI-NEMA 4X
Operating temperature: 5C to 40C (41F to 104F)
Storage temperature: 25C to 70C (15F to 158F)
Relative humidity: 5% to 95% (noncondensing)
Certifications: CE specifications EN-60101 and EN-61325
Weight/shipping weight: 68 kg/136 kg (150 lb/300 lb)
pH: TruSens Transmitter (electrochemical), TruFluor pH Transmitter (single-use)
DO: TruSens Transmitter (electrochemical), TruFluor DO Transmitter (single-use)
Temperature: TruSens Transmitter (RTD)
Pressure: TruTorr Transmitter
Load cells*: Transmitter (vessel has built-in load cells)
Foam level: Transmitter and cable assembly
Agitator: Variable frequency drive (VFD) included to control agitator motor
The Thermo Scientific HyPerforma Single-Use Fermentor (S.U.F.) and associated BioProcess Containers (BPCs) are designed to provide enhanced functionality, ease of use, and efficiency. The complete HyPerforma S.U.F. system consists of a fermentor tank and a HyPerforma S.U.F. BPC or a HyPerforma Enhanced S.U.F. (eS.U.F.) BPC. Both are available in 30 L and 300 L sizes. The HyPerforma S.U.F. BPC features a 5:1 turndown ratio and is available in Thermo Scientific Aegis 5-14 and CX5-14 film options. All HyPerforma S.U.F.s maintain traditional stirred-tank fermentation design principles, including specific height-to-diameter ratios (3:1) and a top-driven impeller location that delivers optimum cell viability, performance, and scalability from process development through production.
HyPerforma S.U.F. hardware features
All units come standard with 4 probe hangers, a drive shaft, and a resistance temperature detector (RTD)
Other features are available, such as condensers, load cells, vent filter heaters, cable/tubing management tree, and backup exhaust filter pinch clamp
Complete mixing system with a water jacket for temperature control
The drive shaft inserts into the BPC through the mixing drive motor and locks into the BPC agitator assembly
30 L HyPerforma S.U.F. hardware specifications:
Fluid Jacket
Jacket area: half/full volume 0.14/0.31 m2 (1.6/3.35 ft2)
Jacket volume 2.53 L
Jacket flow rate 4.4 GPM at 1.82 bar (26.5 psi)
Process connection 1 in. sanitary tri-clamp or quick connect
Nominal cooling load 50 W/L minimum recommended
Approximate liquid heat-up time (237C), half volume 1 hr
Approximate liquid heat-up time (237C), full volume 1 hr 16 min
RTD or thermocouple, 3.18 mm (1/8 in.) OD RTD: Pt-100 (standard)
Outer Support Container
Overall width 129.4 cm (50.9 in.)
Overall length 92.6 cm (36.5 in.)
Height to top of vent filter bracket 218.4 cm (86.0 in.)
Height to top of motor 157.7 cm (62.1 in.)
Dry skid weight (mass) 291.0 kg (641.5 lb)
General
Electrical power supply requirement 120/240 VAC, single phase, 20/10 A
Validated system reliability (minimum) 0.9 at 90% confidence level
pH and DO probes autoclavable type
(Broadley James, Hamilton, Mettler Toledo) 12 mm diameter x 215235 mm insertion length x 13.5 PG thread
Minimum ceiling height required 239 cm (94 in.)
Noise level <70 dB at 1.5 m
Additional Prep Fees May Apply