Get the most from your cutting system.
Get accurately cut parts every time.
The GT-series of cutters employ up to six separate vacuum zones to hold material firmly in place during the cutting process.
Long vertical knife strokes and automatic knife re-sharpening eliminate hanging threads ensuring quality cut parts from top to bottom ply.
Long-lasting GERBER BRISTLE SQUARE® cutting surface allows knife blade to
penetrate without damage
Graphical user interface simplifies operator training and daily use
Maximize throughput.
Automatic SMARTbite™ calculator analyzes each marker to determine the maximum number of pieces to be cut with a minimum number of material advances to maximize cutter throughput.
Operators can easily adjust cut speed and knife speed according to the type of
material being cut to maximize throughput.
Import and optimize data, and create markers directly from most standard data formats, including Gerber’s AccuMark® system.
Easy to operate.
Continuous, real-time, graphical display of operating parameters, vacuum level
and cut speed provides a comprehensive overview of the entire cutting process.
User screen displays cut job, including the sequence of cut pieces, for verification; displays cutting progress.
Easily retrieve cutting setup files for quick retrieval to accelerate future cut jobs.
Realize a fast return on your investment.
Cutter information database (CIDB) generates a report upon request that pro
vides critical information concerning time management. Reports specify information by shift including how long the cutter was in operation, total perimeter of parts cut and much more
Available cutting lengths
170 cm (67 in) • 254 cm (100 in)
437 cm (172 in) StandardMachine
234cm (92in) Standard Machine
Fabric height (compressed) GT5250 5,2 cm 2.0 in
Cutting speed (maximum)- GT5250 GT5250 / GT7250 2,4 m/s2 1/4 g
Cutting Widths
GT5250 / GT7250 1,7; 2; 2,4 m 67, 79, 94.5 in
Table weight
GT5250 / GT7250 2318 kg 5,100 lbs
Table heights (all models) 75, 80, 86, 91cm 29.5, 31.5, 34, 36 in
Electrical
Control Power
Table Vacuum
•50 Hz vacuum blower (3 phase)
•60 Hz vacuum blower (3 phase)
Average Consumption
Technical Specifications for GT5250
Compressed Air 113 liters/min @ 6.8 bar 4 SCFM @ 100 PSI
Operating Environment
Temperature (maximum) 43ºC 110ºF
Humidity (maximum)
Vacuum System 760 m above sea level 2,500 ft. above sea level
Noise
Throughput - average (depending on application)
3-wire 220V, single phase, 50/60 Hz, 30 A
200V at 108 A, 220V at 96 A, 380V at 55 A
240V at 88 A, 480V at 44 A, 575V at 37 A
75 dBA
95% (non-condensing)
18 KW
24 KW
Lateral travel kit enables cutter to move
between multiple spreading tables
Zone vacuum regulator
Additional Prep Fees May Apply
