Millipore Milli-Q Gradient A10 Water Purification System
**This Unit has been tested as far as we could. Quantum Cartridges & UV lamp need to be replaced. Unit has broken plastic on top side (does not affect functionality). See photos for details.
The Milli-Q Gradient A10 Water Purification System offers your lab reliable access to Type 1, ultrapure water for applications in spectrophotometry, spectroscopy, chromatography, and biochemistry, helping with data reproducibility, fouling reduction and baseline noise, giving you accurate research results.
The Milli-Q Gradient A10is compact and be stored anywhere in the lab that is convenient, bench top, under the bench, or on a wall. The flowrate can run up to 1.5 liters a minute, with a noise level or 42 db. The Gradient A10 Water Purification System has a built in TOC monitor to alert you when the filter pack should be changed.
The water purification system has a number of modes accessible through the keypad, or operated automatically by the microprocessor including system maintenance, TOC monitoring and alarm displays.
The Milli-Q can display various Product Water quality parameters:
Resistivity Measurement Range: 2.4 18.2 M.cm (compensated to a 25C value)
Conductivity Measurement Range: 0.055 0.294 S/cm
Temperature Measurement Range: 0 45C (not the system temperature operating range)
TOC Measurement Range: 1 999 ppb
Specifications:
Water: Type 1
Noise level: 42 dB
Flowrate: up to 1.2 liter/minute
TOC: Max ppb
Pyrogens: <0.001 Eu/ml
Resistivity: 18.2 M cm
Humidity: 50% - 80% without condensation
Ambient operating temperature: 5C< T< 25C
Ambient storage temperature: 5C< T< 40C
Feedwater Requirements:
Feedwater conductivity < 100S/cm @25C
Feedwater temperature: 5 to 35C
Feedwater flowrate: 1.5 liters/minute
Minimum feedwater pressure: 0.0 bar
Maximum feedwater pressure: 0.3 bar
Additional Prep Fees May Apply
