1.1. Base Equipment
Item # 1. Duplex Feed Water Booster Pumps.
Function: Maintain City feed water pressure and flow to the Pretreatment and Reverse Osmosis System.
• (2) Part W2T303322
• Rated at 30 gpm @ 39 PSI Duty Point, 1.5 horse power, VFD Motor.
• Grundfos Model # CRNE5-4 208/230 3PH
• Grundfos Item #96749303
Item # 2. QS41 Pretreatment and Reverse Osmosis System
Function: Multiple function technology. Please see the following technologies included on the QS41.
Simplex Big Blue 5 Micron Pre-filter Housing - Polypropylene, Quantity One (1)
Function: Particle Filtration
Twin Alternating Water Softener, Quantity One (1)
Function: Hardness Reduction
• (2) 14”D x 52’H diameter non-code FRP Pentair pressure vessels
• Strong acid cation resin with quartz support bed
• FLECK Multi-port brass valves
• Volumetric initiated regeneration controls on first unit. Timeclock initiated regeneration controls on second unit. Both inside NEMA 3R enclosures
• (1) common, PE brine tank
• SCH 80 PVC piping and valves
• Factory pre-plumbed and mounted on pretreatment skid (brine maker is free standing)
Simplex Carbon Filters, Quantity One (1)
Function: Chlorine Removal and Organics Reduction
• (1) 24” diameter non-code FRP pressure vessels
• Activated Carbon with quartz support bed
• Multi-port brass valves
• Timeclock initiated regeneration controls inside NEMA 3R enclosure
• SCH 80 PVC piping and valves
• Factory pre-plumbed and mounted on skid
One (1) Single Pass Reverse Osmosis System
Function: Reduction of TDS, Particulates, Organics, and Bacteria
• Vantage M41 Series, model M41RGP004
• 5.2 gpm product flow, 75% recovery
• (4) non-code, PVC, pressure vessels
• (4) 2.5”x40” thin film composite, tape wrapped, RO membranes
• Polypropylene Prefilter housing with 5-micron cartridge
• Schedule 80 PVC and polyethylene tube piping (product)
• Brass high pressure reject and recycle piping
• Microprocessor controller and motor starter inside NEMA 4X enclosure, 208 VAC, 3Ph
• Instrumentation: conductivity, temperature, pressure, and flow rate
• Factory pre-plumbed, pre-wired, and skid mounted
Item # 3. RO/DI Product Water Storage Tank with Accessories, Quantity One (1)
Function: Product Storage
• One (1) 500-gallon, non-code, polyethylene, conical bottom, gasket lid tank, threaded fittings, spray ball and painted steel stand (72” diam. x 104” ht.)
• (1) 1 rd. x 20” polypropylene non-code vent filter housing with 0.2-micron absolute hydrophobic element
• (1) Level Switch
• Loop return backpressure regulator valve, pressure indicator, resistivity probe, isolation and drain valves
Item # 4. Distribution Skid, Quantity two (2)
Function: Polishing and Distribution of final Product Water
• DIRS20 P/N DIRSPVUV2 (Modified)
• Will deliver 30 gpm maximum at 70-75 psig maximum to distribution loop
• (1) Grundfos CRNE, 316SS, centrifugal pump, with TEFC motor, VFD Drive with integral pressure sensor, Capacity: 30 gpm @ 100 psig (regulated by VFD), flanged connections
• Manifold for (6) 3.6 ft3 service mixed bed deionizers, 3 x 3, worker/polisher configuration
• (1) Aquafine Ultraviolet UV unit, Disinfection, flanged connections
• (2) 5-micron pre-filters and (3) 0.2-micron absolute Post filter elements.
• NEMA 4 Siemens PLC control panel
• (1) Thornton 300 M Instrument for Resistivity
• Factory pre-plumbed, pre-wired, and skid mounted
Additional Prep Fees May Apply
