PFM Pearl Horizontal Flow Wrapper with 3 Axis servo Motion Controller
*This information was taken directly from the machine and the shipping invoice.*
Model Pearl
Right-Hand Version (Flows left to right)
One-Up bolt on rotary jaw 8.6" wide, 5.9" dia, 3.9" high product opening
15" Centers for Flight Distance Belt, 1 3/16" square plastic top carrier chain
62" Product Loading area
3 Axis Servo System including CMZ color HMI, CMZ motion controller, 3 CMZ brushless servo motors (infeed, fin wheels, and jaws)
"No Product, No Bag" and "Misplaced Product Detection" features (product dependent)
Lexan Interlocked Safety Guards
Fin Roller Configuration (cold, hot, fold)
Print Registration System
Capable of a 23.6" film roll, unwind with self-centering film shaft
8" Film Last Used on Machine
Infeed conveyor length of 8.5 feet, Outfeed conveyor length of 41"
Code Dater Included
Transverse seal pattern jaws (Horizontal seal on both end seals)
Electrical: 230v 20amp 16FLA 3 Phase
EXTRAS
7 Pearl Casters
Pearl Air Evacuation System - Via vacuum/venturi system to reduce air within the package, includes vacuum pump.
FlexPackPro TTO printer Model #130c7 (Print area 32mmx125mm) *Upgraded to XL Model (Never Connected for Use)
FPP 130c XL Mounting Bracket
Available under power for demonstration.
Copy of e-manual included for this specific machine.
Full training and set up available at additional cost.
*This Information was taken from the manufacturer's website, please read over information and specifications carefully to ensure correctness.*
The PFM Pearl is a full-servo horizontal flow wrapper that produces pillow-pack style packages from a flat roll of heat or cold sealable wrapping material.
The Pearl has a cantilevered construction with a carbon steel frame, compact design, cutting edge hardware, and reliable, operator-friendly control software. Light-contact and no-contact high-speed in-line feeding system. Belts mounted on cantilevered structure for easy removal. Driving rollers, scrapers and supporting plates removable without tools. High-speed fully servo-driven wrapper runs up to 100 meters per minute.
Drive motors are connected directly to the various assemblies. The electrical panel is housed inside the machine frame and protected from the external environment. Manufactured with modular pre-assembled units designed to be easily accessible and replaced. The front of the machine is free from any obstruction. Elegant and rational design with simple and sturdy construction.
Cantilevered construction and polymer molded components with graceful radiuses ensure no dust traps. All guards can be easily removed. HMI and start/stop buttons have been ergonomically situated to facilitate accessibility. Up to 120 cycles per minute, capable of wrapping different products in the food and non-food sectors. Fin Seal assembly with three sets of rollers: Film pulling, film sealing complete with automatic opening at machine stop, and fin seal foldover.
Product Dimensions
Length: 1.57" - 13.78" (40mm - 350mm)
Width: 0.19" - 8.66" (5mm - 220mm)
Height: 0.04" - 3.94" (1mm - 100mm)
Maximum product dimensions cannot be processed simultaneously
Supported Materials
Laminated
Bonded polypropylene
Micro-perforated polypropylene
Polyethylene
Heat-shrinkable materials with trimmed seals
Specifications
Film width: 19.68" (500mm)
Film roll max OD: 13.78" (350mm)
Infeed length: 59", 90.5", 114.2" (1,500mm, 2,300mm, 2,900mm)
Crimp jaw length: 9.84" (250mm)
Additional Prep Fees May Apply
