One NEW UNUSED Stainless Steel Unscrambler/Feed Table. This unit is a 36 inch stainless steel table that has a disc thickness of 1/8 of an inch and comes with a 90 volt 1/8 HP Dayton Gear Motor, 20 output RPM & 700 lbs/In torque, Voltage is 115 Volts and has a Variable speed controller. These units are designed to load your empty containers onto the filling line. The height floor to Disc is adjustable from 28 to 34 inches. Weight is 150 lbs. Unit has an out side rim lip to prevent packages from falling off table, Integrated transition Table, integrated Infeed/pack out Table with adjustable container Guides
One Used Tablet/Capsule Electronic Counter manufactured by Kalish Swiftpack. This unit is a 12 Lane Electronic Tablet Counter. Unit comes with dual lane conveyor with gating control. Electronic controls feature instant memory recall for fast, easy set up on 1000 products. Power lift Stand adjusts machine for different bottle heights at the touch a button. Vibratory Funnel discharge system assists flow of large products into containers. Easily integrates with any packaging line. Dismantles for cleaning in five minutes. Keypad entry selects accurate count from 1 to 65,000. Powerful microprocessor maximizes speed and eliminates miscounts. Count, batch size, bottle indexing, product scan time, pre-count and speed offset are memorized for instant recall on up to 1000 products. Built-in diagnostics, with fault display, alert operators to conditions such as product overfeed, over count, low air supply, no bottle and batch completion. Swiftpack’s unique high speed scan enables the machine to identify and count products which are overlapped or touching. All components requiring cleaning can be completely removed from the machine without the use of tools. Unit is in Excellent operating condition
One used cottoner manufactured by King. This unit is a model CF 100 RL Unit is S/S and can handle up to 100 containers per minute. Comes with height adjustment, start/stop controls, Plexiglas guarding and is mounted to a Stainless Steel enclosed frame that comes with an approx. 7.5 long S/S conveyor with vari speed drive. Electric’s are 220 V/3/50-60 Hz, Inverted U cotton placement
One Used Kapsall Capper Model A 2. This unit is an all Stainless Steel C frame designed unit. The unit is a fully Automatic 6 spindle capper. This capper is capable of speeds up to 200 BPM and is equipped for cap size range from 18 mm to 70 mm, and has a 24 inch S/S centrifugal bowl feeder model FSRF-24. This C frame portable unit is on castors. Unit has a fully adjustable cap chute with single gripper belt. Electric's 208 Volt 3 phase 50-60 Hz.
One NEW UNUSED Neck Bander. Manufactured by Marburg Industries. This unit is an Entry Level Autocapsealer. Simplicity of design, user friendly interface, and ease of use make it easy for line personnel to understand and operate. Using a spacing wheel instead of traditional feed screw product transport mechanisms, changeover takes less than 10 minutes. Speeds up to 100 bottles per minute. The M5 series size range 25-90 mm. Lay Flat. Unit comes with ONE set of tooling for band size.
ONE NEW UNUSED Enercon Induction Sealer, SUPER SEAL 100 – Waterless Induction Sealing System Super Seal 100, from Enercon uses the same advanced power supply circuitry with an innovative waterless sealing head. The completely waterless system eliminates the need for a water recirculation, saving floor space and money. Power supply with advanced IGBT circuitry High efficiency "plug-in" sealing head Wide Flat Sealing head to accommodate up to 120mm caps Adjustable sealer mount accommodates a wide range of bottle heights Advanced control panel with digital meter Local/Remote mode for power on/power off mounting Yoke NEMA 4 rated for wash-down Input Power: 240 V, 3 Phase 10 amps
One New UNUSED labeler, this unit is manufactured by CVC. The unit is a Model 300C Wrap around Labeling System. This unit comes with a 4 Wide X 79 Long Vari speed conveyor. The unit also comes with a C60-1 Hot stamp coder. Will handle 6” high label.
One NEW UNUSED Accumulating Turntable made of Stainless Steel. This unit is a 36 inch model that is manufactured in the USA. This unit is completely stainless steel and is driven by a vari speed 90 Volt, 1/4 HP Dayton Gear Motor. Electrics are 115 volt, 1 PH, 60 HZ. Height floor to Disc is adjustable from 28 to 34 and the weight is 150 lbs. Single rail system with HDPE bottle contact surface and tool-less adjustments.
Additional Prep Fees May Apply
