Mixing tank with motor and mixing shaft/paddle. All works fine.
This was used for a saline solution mix and is very clean.
Tank is approx. 8 ft high, by 5 ft diameter. Fiberglass. Comes with valves/pipes as shown in pics.
Motor and mixing shaft are also included - great operating condition, stainless steel shaft and mixer paddle. There is a picture from the top thru the inlet so you can see inside of tank, the long shaft, and the mixer paddle at bottom. Motor is 115 or 230 V, 1/4 HP, single phase. Its output shaft is connected thru gear box/reducer, to the stainless shaft with paddle on bottom. Liquid is filled from top (you can connect any type of inlet to the threaded or PVC opening), and the fluid comes out thru bottom when valve is open. Since this is fiberglass tank, you can add additional opening if needed for your configuration.
For shipping, since the tank is large, it is best to send your own truck and strap it down as you see fit. If needed, we could lay it on its side and strap it to 2 pallets. We would rather not take the motor/shaft out from the tank, but I believe that is possible is needed.
This is an AMAZING deal for these two very expensive items !!
If you want to buy just the tank, or just the motor with mixing shaft, we could arrange that. Contact me to discuss.
Additional Prep Fees May Apply