Thermo Scientific HPG-3200SD Standard Binary Pump P/N 5040.0021
***This unit was tested to specifications. Unit has slight wear from normal use. Buyer can expect the same item pictured with 30-day warranty. See photos for details.
(Please be advised that any warranty/guarantee/return policy provided from the seller is between the buyer and the seller only. Bid on Equipment is not and cannot be held responsible in any way. Please reference our Terms and Conditions for further information.)
Enjoy accurate gradients and precise retention times while meeting the requirements of diverse sample types with a wide range of flow rates. The Thermo Scientific Dionex UltiMate HPG-3200SD Standard Binary Pump is ideal for analytical LC separations on standard-bore columns. With support for pressures up to 62MPa (9,000 psi, 620 bar) at flow rates of up to 10 mL/min., UltiMate 3000 SD pumps excel in standard LC applications offer and full compatibility with fast UHPLC separations, including short sub-2m particle columns for faster analysis and lower solvent consumption.
Recommended Use
The HPG-3200SD pump is recommended for routine analyses using conventional LC and high-throughput LC in the pharmaceutical, food and beverage and environmental industries. For more flexibility in method development, the HPG-3400SD Binary Standard Pump or the LPG-3400SD Quaternary Standard Pump are recommended.
Simple Method Transfer
UltiMate 3000 Standard SD and Rapid Separation (RS) pumps and system configurations provide similar gradient delay and extra-column volumes. This simplifies the method transfer between method development labs commonly using UHPLC pumps and QC and production labs with their standard LC pump setups.
Features
Serial dual-piston operating principle, high-pressure gradient proportioning
Wide operating flow rate range from 100L to 10mL/min. with high flow rate accuracy
Support of operating pressures of up to 62 MPa (9,000 psi/620 bar)
Thermo Scientific SmartFlow technology to automatically compensate for compressibility;no manual solvent setting needed
Large selection of mixing volumes to perfectly balance gradient delay volume with mixing efficiency
Active rear-seal wash and floating pistons to maximize seal lifetime and pump uptime
Manufacturer's Specifications:
Description: HPG-3200 SD Binary Standard Pump
Flow Accuracy: 0.1%
Flow Precision: <0.05% RSD or <0.01 min SD, whichever is greater
Gradient Formation: High-Pressure Proportioning
Max. Flow Rate: 10 mL/min.
Pressure Range: 2 to 62 MPa (9000 psi)
Type: Serial Dual-Piston Binary Analytical Pump
Emission Sound Pressure Level: <70 dB(A) in 1-m-distance
For Use With (Equipment): 15-Pin D-Sub Connector for Solvent Rack/Degasser Connection
GLP Features
Full support of Thermo Scientific Dionex AutoQ instrument qualification, qualification status and system wellness monitoring. All system parameters are logged in the Chromeleon Audit Trail.
Gradient Delay Volume
35-1550 L(Depending on the SpinFlow mixer configuration)Default: 400 L
I/O Interfaces
2 digital inputs, 2 relay outputs
Min. Flow Rate
0.001 mL/min. (Recommended: 0.05 mL/min.)
No. of Eluent Lines
2
Operating Principle
Serial dual-piston
PC Connection
USB for PC connection, USB hub with 3 sockets integrated
Pressure Ripple
Typically: <0.2 MPa or <1% whichever is greater
Proportioning Accuracy
0.2% (full scale)
Proportioning Precision
<0.15% SD
Solvent Degassing
External (optional)
Version with Solvent Selector Valve
HPG-3400 SD
Overall Width (English)
16.5 in.
Overall Width (Metric)
42 cm
Overall Height (English)
6.3 in.
Overall Height (Metric)
16 cm
Overall Depth (English)
20 in.
Overall Depth (Metric)
51 cm
Weight (English)
35.2 lb.
Weight (Metric)
16.2 kg
Voltage
100-120 V, 60 Hz; 200-240 V, 50 Hz
Frequency
100-120 V, 60 Hz; 200-240 V, 50 Hz
Unit Size
Each
Additional Prep Fees May Apply
