SOGEVAC LEYBOLD Single-Stage, Oil-Sealed Rotary Vane Vacuum Pump | Vacuum Pumps
    $1,500.00
    $1,100.00

    We'll submit your offer right away and will let you know as soon as the seller responds

    Want to speak to the seller?
    Call us at 1-847-854-8577

    Did you know?

    • Buy This Now will submit at asking price
      BoE will be in contact within 1 business day.
    • This is NOT a timed auction.
    • BoE highly recommends buyers Contact the Seller to get questions answered prior to placing an offer.

    Item Details

    Item Id 398885
    Item #: 398885
    Item: SOGEVAC LEYBOLD Single-Stage, Oil-Sealed Rotary Vane Vacuum Pump
    Model #: SV 40/65 BIFC
    Serial #: 31001528037
    Year Built: N/A
    Location: Alberta
    Price: $1,500.00

    Description

    FREE SHIPPING to the USA and Canada.
    The EU made vacuum pump appears in very good used used condition and comes on its original shipping pallet and box with accessory kit. It is warrantied to be functional on delivery after being appropriately commissioned (add fluids). Please note this is set up for use using 240VAC and will require a standard 250V twist lock plug receptacle.

    A second unit is now available (Pump 2 in pics). It is missing the factory power cord adapter PN-971457 and is available at a $100 discount. Its Serial Number is:31001576927.

    According to the manual:
    1 Description
    Sogevac pumps are designed for pumping of inert gases in the range of rough vacuum, between atmospheric pressure and ultimate pressure of the
    pump. When removing condensable vapors, periodic opening of the gas ballast valve is required.

    1.1 Principle of operation
    The Sogevac® pumps are single-stage oil-sealed rotary vane vacuum pumps. The rotor, having three slots in which the vanes are sliding, is eccentrically installed in a pump cylinder (stator).
    The vanes separate the interior space into 3 chambers. The volume of these chambers varies with the rotation of the rotor.
    The gas sucked into the inlet chamber is compressed and then pushed out at the exhaust valve.
    The oil injected in the inlet chamber guarantees the air-tightness, the lubrication and cooling of the pump. It is dragged off by the compressed gases and roughly separated by gravity when entering in the oil sump. A fine separation is then operated in the exhaust filter. An internal transfer pushes the collected oil back into the vacuum generator, the transfer is operated by a float valve to avoid atmospheric air coming from the oil casing to the inlet of the pump when no oil is present in the recovery system.
    The oil circulation functions by differential pressures.
    The pumps are equipped with a gas ballast valve for pumping condensable vapors.
    The anti suck-back valve at the inlet flange avoids oil coming back into the inlet line when the pump is stopped. This is valid for working pressures below 100 mbar and under the condition that the valve is kept clean and in good condition. The anti suck-back valve is not a safety valve. If oil back flowing is to be avoided by all means, it is necessary to mount a separate safety valve on the pump inlet.
    Some variants are equipped with a frequency converter giving a constant pumping speed independently of the mains frequency and regulating the pump power consumption. At high inlet pressures, the pump speed is decreased. The pump speed can be reduced to 900 rpm (idle mode) to reduce the power consumption w/o loss of end pressure on some pump variants. In this
    idle mode, the pump inlet pressure must remain below 10 mbar.

    SV40 BI FC
    Technical data 50 Hz & 60 Hz
    Nominal pumping speed m3/h ≥ 53
    Pumping speed (according to PNEUROP) m3/h à 2 mbar ≥ 36
    Ultimate partial pressure without gas ballast mbar ≤ 0,2
    Ultimate total pressure with small gas ballast mbar ≤ 1,0
    Water vapor tolerance: with small gas ballast approx. mbar 10
    Water vapor tolerable load: with small gas ballast approx. kg.h-1 0,34
    Noise level (according to DIN 46 635) dB (A) ≤ 59
    Motor power - Rated rotational speed kW - min-1 1,6-1800
    Mains voltage (+/- 10 %) AC ~ V 200 ... 240
    Protection - Insulation 1) IP 20 - F
    Leak rate mbar.I.s-1 1 x 10-3
    Ambient temperature °C 18 ... 40

    For further specifications, please review the manual which can be downloaded at no charge from the University of Victoria (Canada) when using Google and search term SogeVac SV40-65 BI FC. The nameplate pic in this ad will also provide more specific detail.

    Free delivery includes urban centers in the continental lower 48 US states and southern Canada. Delivery will be to a commercial grade loading dock. Additional charges of up to $150 will be incurred from the trucking company should curb level delivery be required using a truck with a liftgate. Alternative delivery to a freight depot for customer pick up can be arranged at no charge. Delivery to other locations within North America and elsewhere can be arranged at extra cost. Please write if additional details are required.

    Price is for each, 2 units available.

    Additional Prep Fees May Apply

    Shipping

    Height: 30.00 in
    Width: 24.00 in
    Length: 36.00 in
    Weight: 130.00 lbs
    Prep Fee: $0.00
    Registered Customers can request shipping quotes free of charge. Shipping Quotes take 1-3 Business Days to Process
    Request Shipping Quote

    charticon This item has  today
    moneyicon Have one to sell?
    Sell
    Need Financing? FinanceLink

    Testimonials

    • "The biggest demand for manufacturers today is to become operational as quickly as possible and Bid on Equipment provides this solution." - Dave M.
    • "The strength of their site is how often our machinery comes up on web searches." - John G.
    • "We appreciate BoE... Always helpful, friendly and very professional." - Ali L.
    • "If you have questions about machinery you're buying they will find someone who can help. Everyone I talk to here is very friendly." - Tim Y.
    • "BoE is a powerful site that has yielded great results for our company. If you need to buy or sell equipment, I recommend this site." - Michael M.
    • "BoE keeps the engine turning and its potential is limitless. They take out the nonsense that you find on auction sites." - George P.
    • "I have sold 2 large Electric Motors through Bid On Equipment. They got them sold within a month!" - Richard B.
    • "The best thing to happen to our company, the personnel are fantastic..." - Ron W.